Garbage Disposal Installation in Jacksonville, FL
Replacing a leaking, jammed, or burnt-out disposal — or adding one to a sink that's never had one. FixAway installs continuous-feed and batch-feed disposals across Jacksonville. Most jobs take an hour, including testing and cleanup.
New Disposal Installation
Adding a disposal to a sink that doesn't have one requires a sink flange swap, a new electrical connection (we can install a switched outlet under the sink), and adjusted drain plumbing. We handle all three. We can supply the unit (1/3 to 1 HP, continuous or batch feed) or install a model you've already bought.
Disposal Replacement
If your existing disposal hums but won't spin, leaks from the bottom, or trips the breaker, it's reached end of life. Replacement is faster than repair on most units — the motor seals fail and the housing rusts from the inside. We pull the old unit, reuse the existing flange and outlet when possible, and have you running again the same hour.
Unjamming & Diagnostic
Disposal won't run? It's almost always a jam. We use the right tool to free the impellers, reset the unit, and verify it's running smoothly. If the motor is the problem (humming with no spin even after un-jamming), we'll quote a replacement on the spot.
How A Typical Appointment Works
Every garbage disposal installation visit starts with a scope review focused on new disposal installation and disposal replacement. We confirm access, existing conditions, and the most efficient order of work before starting so your project stays predictable and aligned with your priorities.
During the job, we communicate progress and any adjustments in plain language. At completion, we run a functional check, share care recommendations, and clean the work area so your space is fully usable.
If additional issues are discovered mid-visit, we explain options with clear tradeoffs so you can decide whether to complete everything now or stage the remaining scope in a follow-up plan.
This planning-first approach keeps scope transparent, reduces return visits, and helps homeowners align labor time with budget and scheduling constraints.
Why Choose FixAway in Jacksonville?
Frequently Asked Questions
How much does it cost to install a garbage disposal in Jacksonville?
Like-for-like replacement: $100–$175 in labor. New install (no existing disposal): $200–$350 depending on whether we need to add a switched outlet and reroute drain plumbing. Disposal unit cost is separate.
What HP disposal should I get?
For most Jacksonville households, 1/2 HP is the sweet spot — quiet, reliable, handles typical food waste. Choose 3/4 HP if you cook frequently or have a larger family. 1 HP is overkill unless you run a daycare or in-law unit.
Can a garbage disposal handle Florida fruit peels and shrimp shells?
Most modern 1/2 HP+ units handle fruit peels fine. Shrimp shells are okay in small batches with plenty of cold water. Avoid celery, fibrous greens, and large bones — those jam any disposal regardless of HP.
My disposal hums but does not spin. Should I buy a new one?
Not yet — that's almost always a jam, not a motor failure. The bottom of the unit has a hex-key reset port. If we free the jam and the motor still hums, then it's time for a replacement. We diagnose for free if you book us out.
Do I need a plumber for this?
No. Disposal install is a classic handyman job — it's a sink flange, a P-trap connection, and a corded electrical plug. No drain line modifications, no permits required. Plumbers charge twice the rate for the same hour of work.